Versatile applications: The BCSB food pump from SEEPEX fulfills the requirements of many applications in the food, cosmetics and chemical industries. The materials of the individual components are food-certified (FDA / EU 1935-2004). The joints, which are hermetically sealed by elastomer sleeves and therefore particularly wear-resistant, ensure a long service life. It can be cleaned using CIP, SIP and COP methods for optimal hygiene.
Food grade pump with FDA-approved and EU 1935-2004 compliant components
Wear resistant
Joints hermetically sealed with elastomer sleeves
Simply clean
Sophisticated design for excellent cleaning results: CIP, SIP, COP
Easy maintenance
Low space requirements; standard components facilitate simple maintenance
Cost-saving
Use of tried and tested SEEPEX standard pin joints
Low pulsation
Minimal pulsation and low shear characteristics allow the gentle conveyance of sensitive media
Technologies, Accessories and Options
Technology
Accessories
Options
Pressure branch
Made of stainless steel, polished inside, glass bead blown outside. Allows effective draining. Connection as standard to DIN, Tri Clamp® or any other known fittings
Rotor
Wear resistant and corrosion-resistant materials. Optionally with hard surface treatment.
Conventional geometry
With short pitches and a compact design, the conventional geometry produces high pressures.
6L geometry
With a small rotor diameter and a long pitch, the 6L geometry attains lower surface velocities and extends the service life due to its large sealing line.
Base plate
Tailor-made selection of base plates. The base plates can be easily combined with different drives from all major manufacturers.
Stator
In food-grade materials according to FDA, and in compliance with EHEDG directives. Follows pharma regulations according to several USP classes.
Conventional geometry
With short pitches and a compact design, the conventional geometry produces high pressures.
6L geometry
With a small rotor diameter and a long pitch, the 6L geometry attains lower surface velocities and extends the service life due to its large sealing line.
Equal Wall Stator
The stator with uniform wall thickness is used in situations with very high pressures or temperatures.
Closed pin joint
With or without joint sleeve, which protects the grease-filled joints from penetration of the pumped liquid.
Coupling rod
Made of stainless steel for power transmission. Available with propellers or feed screw.
Mechanical seal
Flushed by the product and located inside the suction area for optimal cleaning.
Mechanical seal housing
Made of stainless steel for mounting the mechanical seal, available with or without quench.
Plug-In shaft
Designed for easy CIP, made of stainless steel and designed to mount the mechanical seal in food grade material.
Lantern
A corrosion resistant design, optionally made of stainless steel, connects the pump and drive and secures the assembly to the base plate or skid.
Plug-in shaft connection
For easy dismantling of the pump and drive enabling quick replacement of the rotating parts and shaft seals. The plug-in shaft pin secures the shaft connection to the drive and the splash ring protects the bearing from contamination/gland leakage.
Overpressure Protection
The pressure gauge switches off the pump as soon as a pre-set pressure is exceeded or not reached and protects the pump from increased wear and tear or piping damage.
Dry-running protection device (TSE)
TSE monitors the temperature of the rotating stator and shuts down the pump when the limit value is reached to protect the pump from dry running.
Seal barrier system
This unit protects the shaft sealing by selectively supplying barrier liquid. Also available with flow meter on request.
Multiple-acting mechanical seal
Mechanical seals arranged in a row. Available in "back-to-back", "face-to-face" or "tandem" sequence.
Global (EN)
